1.0 technical characteristics

1.1 Design & Testing

Tank Case: Comply with Specification: RID/ADR, IMDG and ASME Volume 8 Division 1, T75 UN Transportable Tank Case
Frames: per specification: ISO1496/3 ML2 beam frame design
Corner Casting: ISO 1161/Size and Type Code: 42KW

1.2 frame size and mass

Maximum allowable total mass: 36 000 kg
Weight (± 3% tolerance):17344kg
Length: 12192mm 40 ft
Width: 2 438 mm 8 ft
Height: 2 591 mm 8 ft 6 in

1.3 tank size

Nominal volume (± 1% tolerance):41067 L

?

Inner tank
Inner diameter: 2200 mm
Distance from tangent to tangent: 10070 mm
Corrosion allowance: 0 mm
Head-approximately 2:1 oval

?

Liquid nitrogen screen tank
Nominal volume (± 1% tolerance):2100 L
Inner diameter: 2330 mm
Corrosion allowance: 0 mm
Head-approximately 2:1 oval

?

Outer tank
Inner diameter: 2400 mm
Tangent to tangent distance: 11380 mm
Corrosion allowance: 0 mm
Head-Oval

1.4 pressure & temperature rating

Inner tank: 6.3Bar
Maximum allowable working pressure: 6.3Bar
Design temperature range: 4.2k

?

Liquid nitrogen screen tank: 0.7Bar
Maximum allowable working pressure: 0.3 Bar
Design temperature range: 77K

?

Outer tank
Internal design pressure:-1,0 Bar
External design pressure:/
Design temperature range:-40 to 50 ℃

1.5 performance

BS EN 12213-1999 Clause 3.3, Under Standard Conditions: Method of Evaluation of Thermal Insulation

?

LHe hold time:45 days

1.6 insulation material

Isolation Type: Super insulation Super Insulation
Vacuum layer at room temperature: 2.0x 10-4mbar
Vacuum layer cold: 2.0x 10-6mbar

1.7 manufacturing materials

Frame: Q355GNH GB/T 4171-2008
Outer cylinder: Q345R
Inner tank: SA 240 316L stainless steel
Liquid nitrogen cold screen: SA 240 304 stainless steel
Insulation screen: 5083-O
Anti-wave plate: SA 240 316L stainless steel

2.0 tank box accessories

? Valve type: stainless steel low temperature long handle valve, high vacuum low temperature long handle valve globe valve
? Liquid helium pipeline using 316L stainless steel Sch10S
? Liquid nitrogen pipe 304 stainless steel Sch10S

2.1 liquid helium bottom fill/liquid line

? Valve supplier: domestic
? Pipe size: 50 NB (2 ")
? 末端連接：ANSI 150# 50NB Flange Blind Flange
? Gasket: PTFE Teflon

2.2 gas phase pipeline

? Valve supplier: domestic
? Pipe diameter: 50 NB (2 ")
? 末端連接：ANSI 150# 40NB Flange Blind Flange

2.3 discharge line

2.4 liquid nitrogen dewar outlet line

? Valve supplier: domestic
? Pipe size: 3/4"
? End connection: KF flange blind flange

Installation of 2.5 safety valve burst disc

? Liquid helium valve supplier: domestic
? Liquid Helium Safety Valve Specification: Pressure Setting 91psi
Set pressure 91psi
? Liquid helium bursting disc specification: pressure setting 106psi
Set pressure 106psi
? Valve supplier: domestic
Quantity: 1 x ? "x 4 three-way divertor switching valve (safety valve and rupture disc)
? Liquid nitrogen valve supplier: domestic
? Liquid Helium Safety Valve Specification: Pressure Setting 10psi
Set pressure 10psi
? Quantity: ? "x 1
? Liquid helium bursting disc specification: pressure setting 17.4psi
Set pressure 17.4psi
? Valve supplier: domestic
? Quantity: ? "x1

2.6 level gauge

? Vendor: Wika
? Number of: 2
? Specifications: Millimeter scale with conversion table on the tank

2.7 pressure gauge

? Vendor: Wika
Number of: 3
? Specifications:
2 × indicates the gas phase pressure of helium in the tank and 1 × indicates the gas phase pressure of nitrogen in the tank.

2.8 ventilation standpipe

Two standpipes, all drain valves, bursting discs and safety valves are discharged to the ventilation standpipe above the tank. Separate discharge of helium and nitrogen

2.9 File Loader

1-A waterproof PVC file loader is installed on the frame.

2.10 stamp

One per tank as per specification. The user logo.

2.11 Data Board

One 304 stainless steel data plate per tank per specification.

2.12 valve box

304 stainless steel valve protection box, complete with door.

2.13 tank bracket

1-set of stainless steel cylinder mounting bracket. The mounting bracket is fixed in the valve box.

3.0 complete

3.1 inside

Internal barrel surface
Weld

3.2 external

External surface: sand inspection before paint inspection SA2 ?
Weld

3.3 Accessories

All fittings, including valves and pipes, need to be deoiled and stored in a clean sealed plastic bag until installed on the tank. Clean standards for post-storage oxygen are met.

3.4 cleaning

After the assembly is completed, the internal surface of the inner tank needs to be deoiled, salt washed and passivated. A cleaning certificate is required.

3.5 leak test and nitrogen purge

The inner and outer tanks were tested for helium mass spectrometry leak detection. The tank is purged with nitrogen. Use dry nitrogen (O2<1% residual oxygen, 1.0 bar pressure, nitrogen dew point -20 ℃).

3.6 painting

Carbon steel frame assembly sandblasted SA2 ?, painted as follows:
第一層 Interzinc 42 50 micron min DFT
中間層 Intergard 475HS 60 micron min DFT
最后一層 Interthane 990 50 micron min DFT
? ? ? ? ? ? ? ?TOTAL 160 micron min DFT
Color: Hempel 10000 bright white

?

Sand inspection SA2 ? for carbon poem outer tank, paint inspection shall be as follows:
第一層 Interzinc 42 50 micron min DFT
中間層 Intergard 475HS 60 micron min DFT
最后一層 Interthane 990 50 micron min DFT
? ? ? ? ? ? ? ?TOTAL 160 micron min DFT
Color: Hempel 10000 bright white

3.7 tests and components

The tank design follows the reviewed drawings.

Each production unit has been tested and non-destructive as required by ASME Volume VIII and the manufacturer itself. Each unit is inspected by an authority BV.

Each corner post of the tank bears a weight of 86400kg for the stacking test, and there are 9 highly stacked (8 x 24000kg).

The UN portable tank meets the performance specifications required by the following international agencies:

IMDG - T75
RID/ADR – T75
Additional Approvals:
TIR/Customs
CSC
S & N (36000kg with a P decal)
TC Impact Approved
US DOT

3.8 file

The following documents are required

? Operation Manual
? Cleaning certificate (placed in file loader)
? Initial inspection certificate for each tank
? Nameplate details
? Data books

4.0 Products

UN1963 Helium, refrigerated liquid. Helium, refrigerant

5.0 overall

? 316L/304 inner tube stainless steel 316L/304
? Paint can be maintained for 8 years